HID Kit and Dodge Ram 1500 Halo Projector Headlights Install

Here is a great how to install an HID conversion Kit and a Halo Projector Headlight install on a Dodge Ram 1500.

With plenty of detail and awesome pictures to go long its a great read for anyone wanting to install an HID Kit and or a Projector headlight for their vehicle.

 

First off, Its the Digital 4300K H1 bulb unit from vendor Xenondepot.

First step, is to remove the headlight housings.

Remove dust cover and wiring from unit and pull wires through assembly cover and remove bulb.

Found that the bulb opening wasn’t quite large enough, used a dremel tool and grinding stone to open hole more, worked perfectly. Metal dust was easily blown out of housing.

Installed new HID bulb. The bulb actually had 2 sets of wiring connections but removal of the jumper harness made for a cleaner install.

making a small “X” cut in the dust boot made it very easy to run the new wires and plug ends through for a well sealed cover reinstallation.

Next came adding in the new harness jumper and resistor lead from the regular bulb harness.

As you can see it was easier just to cut off the one plug and splice the new harness directly on.

Only thing left is the Power wiring harness and Digital processor installation under the hood, very easy, just plug and play. Only need to find one power and ground for each headlight.

And finally just reinstall Headlight assemblies.

All done!

[Source]